QUICK NECK SYSTEM SILICONE SEAL

Si tech quick neck system latex seal: It´s flexible, versatile and comfortable! It will keep your drysuit operational at all times! No more costly or time consuming repairs! It is the most effective solution in the market when it comes to sealing the neck area of protective suits. It is called Quick Neck and its developed to provide optimized operational values for the end-user. The Quick Neck is designed to be attached on diving drysuits, amphibious drysuits, rescue suits, watersports garments and more.

450-550-650-750 ET OPEN COMPRESSOR (Threephasic)

Coltri 450-550-650-750 ET Open threephasic Commercial Diving High Pressure Compressor: Open meets professional needs that require large charging capacities in hot, poorly ventilated or tropical countries. It is equipped with 4 front filling connections for high pressure hoses, an intuitive control panel and an electric motor. The pumping unit, chosen from the 4 most powerful, is exposed in the rear part of the structure to ensure a better cooling cycle. For longer filter life, the Tornado high pressure dryer is recommended

ORUST NECK SYSTEM LATEX SEAL

sitech orust neck system latex seal: ORUST Neck System is the third generation of Neck System. An even softer and more flexible Modular Quick Change Solution for the neck! The design provides superb comfort and can be mounted in a great range of garments. The Neck Ring and the Lock Ring is made in a softer material and clips are added to keep the neck seal in place. Tool is no longer needed for installation of the neck seal; the seal and Lock Ring can easily be mounted into the PU-Ring by hand.

LP 250 NITROX ROTARY

Coltri LP250 Nitrox ROTARY for Scuba Diving: It consists of an industrial screw compressor that delivers air at a pressure of 10 bar to the Parker® membrane. The percentage of oxygen obtained at the outlet can be adjusted from 32% to 36% thanks to a valve accessible on the front side of the compressor. If connected to a compressor with pumping unit 315 (MCH 16), Nitrox at 32% can be obtained up to a pressure of 232 bar. The oxygen analyzer allows you to check the correct percentage, adjusting it through the appropriate valve.

ORUST NECK SYSTEM SILICONE SEAL

sitech orust neck system silicone seal: ORUST Neck System is the third generation of Neck System. An even softer and more flexible Modular Quick Change Solution for the neck! The design provides superb comfort and can be mounted in a great range of garments. The Neck Ring and the Lock Ring is made in a softer material and clips are added to keep the neck seal in place. Tool is no longer needed for installation of the neck seal; the seal and Lock Ring can easily be mounted into the PU-Ring by hand.

LP 300 NITROX ROTARY

The Coltri LP300 Nitrox ROTARY model consists of an industrial screw compressor that delivers air at a pressure of 12 bar to a membrane that separates nitrogen and oxygen up to a maximum percentage of 40% O2. The enriched air can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. The oxygen analyser allows checking of the correct percentage adjusted by means of the appropriate valve.

RING 17 WING

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 - 18 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

BASIC COMPLETE HARNESS + KNIVE

Complete set contains of: PA harness with grommet, pocket with knife, crotch strap with 1 integrated D-ring and belt stopper, 1x stainless-steel D-ring, 3x stainless-steel D-ring bend, 6x stainless-steel stoppers, stainless-steel buckle, 5 narrow and 1 wide bungees

QUICK-LINK S.S.

Quick-Link stainless-steel, dimensions 36 x 17 mm, thickness 3,5 mm, opening max 5 mm.

BIG POCKET FOR SUIT

A pocket suitable for sticking on a diving suit, velcro closure. Made for carrying a spare mask, reel, buoy or a snack. Dimensions 29x19x6 cm. Material:cordure 1100, neoprene, velcro

LP 600 NITROX ROTARY

At the top of the Nitrox line, the Coltri LP600 ROTARY system consists of an industrial screw compressor that delivers air at a pressure of 8 bar to a membrane that separates nitrogen and oxygen at atmospheric pressure until Nitrox 40% O2 is obtained and can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. Exclusive to the the Heavy Duty line compressors.

SITECH BALANCED PEE VALVE

Use a Pee Valve and extend your bottom time. No use having loads of breathing gas when nature prevents you from concentrating. Long working hours and deco times are no longer a problem. Relieve yourself in a donned drysuit!

COMPLETE ADJUSTABLE HARNESS + KNIFE

Complete set contains of: PA harness with grommet with integrated: 2x adjustable stainless-steel buckles, 2x stainless-steel D-ring bend and 2x stainless-steel stoppers, 4 narrow and 1 wide bungees

copy of COMPLETE ADJUSTABLE HARNESS + KNIFE

Complete set contains of: PA harness with grommet with integrated: 2x adjustable stainless-steel buckles, 2x stainless-steel D-ring bend and 2x stainless-steel stoppers, 4 narrow and 1 wide bungees

RING 17 WING RED

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 - 18 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

FILLING PANEL FOR COMPRESSOR

It has two gauges (one for each pressure) for controlling the load pressure. With its internal pressure regulator, you have the ability to offer dual pressure load (2 outputs and 2 outputs 300 bar to 225 bar).

FILLING PANEL FOR COMPRESSOR WITH CAMS

Panel loading with 4 exits for connection to any compressor Coltri range. It has manometer to control the load pressure. Combined with a bank of air, it can be an ideal place for a bottle loading station configuration.

REM LINE MARKER

Rectangular DTD guide wire marker REM (Reference Exit Marker) in plastic of different colors.

RING 20 WING

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 15 - 20 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

COOKIE 57 MM

    Cookie in different colors, for marking lines in cave diving.